cymedics biocryo

  • Gentle application because of vacuum modulation.
  • Cryolipolysis without scalpel and low personnel requirement.
  • Application temperature from +2°C to -10°C programmable.
  • Separately controllable applicators.
  • Biocybernetic stimulation system for gentle tissue revitalisation – unique on the world market.
  • Applications on all relevant areas so that ideal combinations result.
  • Reliable. Made in Germany.

Perfect efficacy

cymedics biocryo: This multifunctional “space-saving” device fulfills almost all needs for a holistic aesthetic application and allows you to use synergies to deliver the best results at a single application place.
The cool thing: The technology of controlled cryolipolysis for use on stubborn fat deposits. Outstanding advantage of this non-invasive procedure is its high degree of efficiency and extremely low time requirement.
Thanks to the highly automated application and monitoring, time-related personnel costs are minimized and you´ll benefit from a uniquely favourable cost-benefit ratio. Not only this, but your customers will also be highly satisfied.
In close cooperation with another innovative and highly effective method for almost all problem zones of the body, this is the right combination for success. Biocybernetic stimulation aims to restore the energetic balance in the body regions to be treated. Compared with a database integrated into the software which contains empirical data an individual optimal improvement model can be generated for each customer.

Model: cymedics biocryo
Frequency width: Carrier / Basic frequency: 0.25 ± 0.05 Hz
Switching frequency: 1– 625 Hz
Output: Max. 100 mW, max. 1,200 μA, max. 60 V
Control range: Skin conductance value 3.2 – 75 kΩ
Power connector: 100 – 240 VAC / 50 -60 Hz
Maximum power consumption: 50 W                                                                                             Applied part: Typ BF
Lowest cooling temperature: –10 °C                                                                                     Programmable time: 30 – 80 minutes
Max. vacuum pressure: –250 mbar                                                                                                Vacuum setting range: –100 mbar to –250 mbar (tolerance ±10%)
Power connector: 220 -240 Volt / 50 – 60 Hz
Cooling: Destilled and deionized water
Equipment class: Class I, Type B
Dimensions (W x D x H): approx. 73 cm x 61 cm x 127 cm                                                                 Weight: approx. 70 kg
Protection class: IP10